Preparing for Use
R&S
®
FSPN
14
Getting Started 1179.4370.02 ─ 01
3. Grab the handles and push the R&S
FSPN onto the shelf until the rack brack-
ets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2
Nm to
secure the R&S
FSPN in the rack.
To unmount the R&S
FSPN from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S
FSPN from the rack.
3. If placing the R&S
FSPN on a bench top again, unmount the adapter kit from
the R&S
FSPN. Follow the instructions provided with the adapter kit.
3.5
Connecting the AC Power
In the standard version, the R&S
FSPN is equipped with an AC power supply
connector.
The R&S
FSPN can be used with different AC power voltages and adapts itself
automatically to it. Refer to the datasheet for the requirements of voltage and fre-
quency.
For safety information, see
To connect the AC power
1. Plug the AC power cable into the AC power connector on the rear panel of the
instrument. Only use the AC power cable delivered with the R&S
FSPN.
2. Plug the AC power cable into a power outlet with ground contact.
The required ratings are listed next to the AC power connector and in the data
sheet.
For details on the connector, refer to
Chapter 4.2.2, "AC Power Supply Connec-
Connecting the AC Power
