manualshive.com logo in svg

Rohde & Schwarz 1322.8003K06, Getting Started

Share
Download
Rohde & Schwarz 1322.8003K06 Getting Started Download Page 59

Operating the Instrument

R&S

®

FSPN

59

Getting Started 1179.4370.02 ─ 01

1 = Toolbar: contains general functionality of the firmware.
2 = Channel tab: contains measurement channel.
3 = Channel bar: shows measurement settings.
4 = Result display: contains measurement results.
5 = Window title bar: contains diagram-specific (trace) information.
6 = Status bar: contains system messages, progress bar and date and time.
7 = Input field.
8 = Diagram footer: contains diagram-specific information.
9 = Softkeys: provide access to measurement functions.

Hiding elements in the display

You can hide some of the elements in the display, for example the status bar
or channel bar, in order to enlarge the display area for the measurement
results ("Setup > Display > Displayed Items").
For details see the R&S

 

FSPN User Manual.

●

Channel Bar

.................................................................................................... 59

●

Window Title Bar

............................................................................................. 61

●

Marker Information

.......................................................................................... 62

●

Spot Noise Information

....................................................................................63

●

Measurement Progress Information

................................................................64

●

Frequency Information in Diagram Footer

...................................................... 65

●

Instrument and Status Information

.................................................................. 65

●

Error Information

............................................................................................. 66

6.1.1

 

Channel Bar

Using the R&S

 

FSPN you can handle several different measurement tasks (chan-

nels) at the same time (although they can only be performed asynchronously).
For each channel, a separate tab is displayed on the screen. In order to switch
from one channel display to another, simply select the corresponding tab.

Alternatively, if many tabs are displayed, select the tab selection list icon at the
right end of the channel bar and select the channel you want to switch to from the
list.

Understanding the Display Information

Summary of Contents for 1322.8003K06






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands