manualshive.com logo in svg

Rohde & Schwarz 1322.8003K06, Getting Started

Share
Download
Rohde & Schwarz 1322.8003K06 Getting Started Download Page 11

Preparing for Use

R&S

®

FSPN

11

Getting Started 1179.4370.02 ─ 01

3

 

Preparing for Use

Here, you can find basic information about setting up the instrument for the first
time.

3.1

 

Lifting and Carrying

The carrying handles are designed to lift or carry the instrument. Do not apply
excessive external force to the handles.

See 

"Lifting and carrying the product"

 

on page 4.

3.2

 

Unpacking and Checking

1. Unpack the R&S

 

FSPN carefully.

2. Retain the original packing material. Use it when transporting or shipping the

R&S

 

FSPN later.

3. Using the delivery notes, check the equipment for completeness.

4. Check the equipment for damage.

If the delivery is incomplete or equipment is damaged, contact
Rohde

 

&

 

Schwarz.

3.3

 

Choosing the Operating Site

Specific operating conditions ensure proper operation and avoid damage to the
product and connected devices. For information on environmental conditions
such as ambient temperature and humidity, see the data sheet.

See also 

"Choosing the operating site"

 

on page 4.

Choosing the Operating Site

Summary of Contents for 1322.8003K06






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands