Rohde & Schwarz 1173.8709K02, User Manual

Page: 53 / 123

Remote control commands
R&S
®
NRPxxTWG
53 User Manual 1178.8371.02 ─ 08
FORMat:SREGister <sregister>
Specifies which format is used for the return value of
*STB?
.
Parameters:
<sregister> ASCii | HEXadecimal | OCTal | BINary
*RST:
ASCii
Example: FORM:SREG ASC
FORMat[:DATA] [<data,length>, <length>]
Specifies how the R&S NRPxxTWG sends the numeric data to the controlling host/
computer.
Parameters:
<data,length> <REAL,32 | 64>
REAL
Block of binary values, 32-bit or 64-bit each; so-called "SCPI
definite length block"
32 | 64
32-bit or 64-bit
If you omit the length, the R&S NRPxxTWG sets the last used
length.
Example for
REAL,32
format:
#6768000....<binary float values>....
Example for
REAL,64
format:
#71536000....<binary float values>....
<data[,length]> <ASCii[,0 to 12]>
ASCii
List of comma separated, readable values.
[,0 to 12]
Defines the number of decimal places.
The reset value 0 does not restrict the number of decimal pla-
ces.
Example for
ASCii,4
format:
1.2938e-06, -4.7269e-11, ...
*RST: ASCii,0
7.7 Configuring the measurement modes
In the following, the settings needed for configuring a measurement mode are descri-
bed.
Further information:
●
Chapter 7.8, "Configuring basic measurement parameters" , on page 56
●
Chapter 7.5, "Controlling the measurement" , on page 39
Configuring the measurement modes