Putting into Operation
R&S FSH
1145.5973.12 1.2
E-11
Putting into Operation
The following section describes how to put the handheld spectrum analyzer into operation and how to
connect external devices, e.g. printers.
Section 2 describes the operation of the spectrum analyzer using simple measurements as examples.
Unpacking the Instrument
The R&S FSH comes in formfitting packaging that consists of upper and lower shells. The two shells
are held together by tape.
The packaging contains all accessories supplied.
!
Undo the tape to unpack the analyzer.
Upper shell
Lower shell
CD-ROM
Headphones
Quick Start
manual
RS-232-C
cable
Power
supply
AC supply plug
(country-specific)
R&S
FSH
!
Remove the R&S FSH and the accessories.
!
Remove the protective foil from the screen.
Note:
Each R&S FSH comes with a unique master PIN. Keep the master PIN in a secure place
away from the R&S FSH. If someone enters an incorrect PIN three times in succession,
the R&S FSH cannot be used again until the master PIN is entered.
