Using the Markers
R&S FSH
1145.5973.12 4.28
E-11
Press the MARKER or DELTA softkey.
The R&S FSH opens a list for selecting the marker or
delta marker to be edited. The markers that are already
switched on are highlighted in green. The (delta)
marker numbers already allocated to a (delta) marker
are deactivated, i.e. greyed out.
Using the rotary knob or the cursor keys, select the
marker or delta marker you want and confirm your
selection with the ENTER key or the MARKER or
DELTA softkey.
The R&S FSH opens the entry box for the frequency of
the selected marker or the spacing between the delta
marker and the reference marker M1.
Using the cursor keys, place the marker or delta
marker near the position you want. The step width
here is 10 % of the X axis.
Then use the rotary knob to fine-tune the marker or
delta marker to the signal The step width
corresponds to the pixel spacing of the trace.
Alternatively, enter the desired position of the
marker or delta marker using the number keys and
terminate the entry with one of the unit keys.
The R&S FSH displays the marker or delta marker last edited in the marker readout box at the upper
left-hand corner of the screen. All marker functions in the SET MARKER menu apply to the displayed
markers.
Automatic marker positioning:
Automatic positioning of markers in multimarker mode
is similar to that of the normal marker. The different
functions always apply to the active marker, which is
also indicated for the various functions in the SET
MARKER menu (example: "M2; PEAK").
