Description of the Menus
CTS60
1094.0006.60 6.32
E-5
6.6.7
Timing Menu (Fixed Part)
This menu displays timing measurements made on the fixed part. If any of these measurements exceed
their tolerance values then they are displayed in red. The following measurement results are displayed:
•
Timing accuracy, is the accuracy of the time period of the configured number of bursts with respect
to the timer on the CTS60. This measurement is displayed with both a value and an indicator bar.
•
Maximum positive jitter is the maximum positive time interval between two successive bursts minus
the average time period.
•
Maximum negative jitter is the maximum negative time interval between two successive bursts minus
the average time period.
Stop/Cont
With this key the measurement can be stopped and started again.
Power
This key allows the power ramp measurement to be selected.
RF Mod
This key allows the RF modulation measurement to be selected.
BER
This key allows the bit error rate measurement to be selected.
Config
Press this key to access the configuration menu for the timing measurement.
Menu up
Press this key to return to the previous menu.
