Page
13
of
21
Fig. 8 Main window of PR Master software
4.2.2 CPR32-NET options
After detection of CPR32-NET unit and controllers connected to its RS485-1 bus, the CPR32-NET is
ready for operation in typical RACS 4 system. It is possible to configure some additional options by
clicking
CPR32-NET
option in the main window of PR Master software, which results in opening
of the window shown in fig. 9 with summary of CPR32-NET setup and top menu with following
options and commands:
Menu: Configuration->Settings
In the window opened by means of this option, the administrator can activate/deactivate power
supply tests and internal tests of CPR32-NET unit as well as select event memory buffer i.e. internal
flash memory or memory card.
