Rodgers Trillium T787, Owner'S Manual

Page: 37 / 100

26
Setting Tutti
To change the contents of Tutti:
1. Make certain Tutti is unlocked (see “Unlocking or Locking Tutti” on Page 25).
2. Select the desired stops.
3. Press and hold SET and press the Tutti piston.
You may want to lock the Tutti again after programming to prevent accidental changes.
Restoring Factory Tutti Setting
The factory defaults for Tutti is stored within the instrument, even after the Tutti settings has
been changed. Because of this, the Tutti can be restored to its original factory setting, if
desired.
To reset Tutti setting to factory default:
1. Make certain Tutti is unlocked (see “Unlocking or Locking Tutti” on Page 25).
2. Press and hold TUTTI. After five seconds, the console display reads TUTTI
UNLOCKED .
3. While continuing to hold the Tutti piston, press and hold SET for an additional
five seconds. The console display reads
TUTTI FACTORY DEFAULT
when
the Tutti is reset.
4. Release both pistons.
Remember to lock the Tutti again once you’re finished.