Rodgers Trillium T787, Owner'S Manual

Page: 75 / 100

64
desired. If you don’t want to send either Volume or Expression from the shoes for a given
MIDI coupler, set this parameter to OFF.
Setting the Expression/Volume Parameter for a MIDI Coupler
To set the Expression/Volume parameter for a MIDI coupler:
1. Hold SET and press the MIDI coupler piston. (The MIDI coupler will flash).
2. Rotate the Select knob to highlight the Expression parameter:
M I D I C o u p l e r G T A
R e v e r b
C h o r u s
E x p r e s s i o n
0
0
V o l
3. Rotate the Alpha dial to select the desired setting (
Off
,
Exp
or
Vol
).
4. Press either the flashing MIDI coupler or General Cancel (‘ 0 ’) to exit.
The Expression selection procedure is complete. Combination pistons which are set
while the MIDI coupler is activated will also store the Expression value. A MIDI
Save may be performed to save this setting as the default. See “MIDI Save” on page
75 for more information.
Global MIDI Settings
In addition to the various MIDI parameters that can be stored relative to individual MIDI
couplers, there are a number of global MIDI settings which affect the entire instrument. Each of
these will be described in this section.
All Notes Off Command
Occasionally, it is desirable to send a MIDI “All Notes Off” message from a keyboard to
reset notes played by external equipment.
To send an “All Notes Off” message from the T787 Sequencer Out and MIDI Out ports:
1. Press and hold SET then momentarily press General Cancel (‘ 0 ’). Release both
pistons.
Instead of saving, you may press and hold General Cancel (‘ 0 ’) and momentarily press
SET to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.
!