Rodgers Trillium T787, Owner'S Manual

Page: 34 / 100

23
P i p e M o d e l i n g
T r e m u l a n t
G T M A I N
D e p t h 0 R a t e 0
(this screen would be displayed if the Great tremulant had been selected)
4. Release the SET piston.
5. If the tremulant you want to change is already selected in the display (
GT MAIN
or “Great Main” in the screen shown above), go to step 6. If not, turn the Select
knob to highlight the tremulant name, then rotate the Alpha-Dial until the
tremulant you want to change is shown in the display.
6. Turn the Select Knob and highlight the value for
Depth
or
Rate
.
7. Rotate the Alpha Dial until you achieve the desired result; the range for each of
these settings is from –9 to +9 . You can preview your changes by selecting a
corresponding stop and playing a note while making an adjustment.
Crescendo
The Crescendo indicator is located to the far right above the swell manual. This indicates the
progressive stages of the Crescendo as the shoe is opened.
The Crescendo must be unlocked to set a Crescendo sequence. Once the sequence is set, it may
be locked again to prevent accidental change.
Unlocking Crescendo
1. Press and hold the GT/PED UNENCL piston for approximately five seconds
until CRESCENDO LOCKED appears in the Console Display.
2. While continuing to hold GT/PED UNENCL , rotate the Alpha Dial either
direction until the Console Display reads CRESCENDO UNLOCKED.
3. Release the GT/PED UNENCL piston. The Crescendo is unlocked.
Setting Crescendo Sequence
1. Press and hold the SET piston.
2. Press the GT/PED UNENCL piston. The piston flashes and the Console
Display reads:
These settings are retained when the instrument is turned off.
!