Rodgers Trillium T787, Owner'S Manual

Page: 42 / 100

31
•
If an internal memory is accidentally copied to the SmartCard, or if a memory level is
to be removed on the SmartCard so the internal memory can be used instead, you can
delete the memory level from the SmartCard. See page 33.
SmartCard Folders
The capacity of a Rodgers SmartCard is much greater than that of the organ’s internal
combination memory. In order to make easy use of this additional capacity, Rodgers uses the
concept of memory folders. Like a file folder, a memory folder is used to store groups of
information on the SmartCard. In this case, each folder can contain a copy of each console
memory level, plus a copy of the Crescendo sequence, Tutti and other settings. Folders on a
SmartCard are labeled A through Z.
This means that a single SmartCard can contain up to 26 different copies of all six Memory
Levels, Crescendo Sequences, Tutti and other console settings, giving you tremendous
storage capability.
A
. . .
Z
Crescendo
Other Settings
Tutti
M1 M4
...
When a SmartCard is first used, it is initialized to use Folder A. This folder is used until a
new folder is selected. The selected folder is saved when the card is removed and later
reinserted.
Selecting a SmartCard Folder
You have the opportunity to select a SmartCard Folder whenever a card is inserted into the
instrument.
To select a SmartCard Folder:
1. If no SmartCard is currently inserted in the instrument, insert card using
procedure outlined above and go to step 3.
2. If SmartCard is already inserted, use the following procedure to get to the
SmartCard screen:
•
Press QUICKMENU and rotate the Select Knob to select
SmartCard
in
the display.
•
Press QUICKMENU again to select and display the SmartCard screen: