Rodgers Allegiant 657, Owner'S Manual

Page: 43 / 76

33
SAMPLE COMPLETE
PRESS CANCEL
3. Release SET and General Cancel (‘ 0 ’).
The Audio Control settings are now saved and will be retained when the organ is turned
off.
Stereo Headphone Jack
The console is equipped with a 1/4" stereo headphone jack located on the black input/output box
underneath the keydesk to the right. Plugging a set of headphones into this jack disables the
sound from all speakers.
Adjusting Headphone Volume
To adjust headphone volume:
1. Insert the headphone plug into the headphone jack.
2. Adjust the OUTPUT LEVEL knob located on the black input/output box
underneath the keydesk to the right.
Auxiliary Controls
The Rodgers 657/677 is equipped with stereo auxiliary input jacks (one for the left channel and
one for the right channel) located on the connector panel under the keydesk to the right. When
using these input jacks, audio signals from other sound generating devices like synthesizers,
MIDI sound modules, and tape players are mixed into the organ’s main audio system. A series
of menus in the Audio Controls category are used to adjust the characteristics of the auxiliary
inputs.
Adjusting Auxiliary Input Volume
To adjust the settings for the Auxiliary Inputs:
1. Press and hold the SET piston.
Public address systems should NOT be connected through the organ’s audio system.
!
Remember, the OUTPUT LEVEL knob controls the organ speaker volume as well, so
do not forget to return the dial setting to its original position before removing
the headphone jack or the organ may be too loud.
!