Rodgers Allegiant 657, Owner'S Manual

Page: 18 / 76

To select a memory level:
1. Press the corresponding memory piston (M1, M2, M3 or M4). It will light.
When the organ is powered on, M1 is automatically selected.
Unlocking or Locking a Combination Memory Level
When shipped from the factory, all memory levels are unlocked so that pistons can be
changed easily. If desired, each memory level can be locked individually so that it cannot be
changed.
To lock a memory level so that it cannot be changed:
1. Press and hold the memory piston ( M1 , M2 , M3 or M4 ) corresponding to the
memory level you want to lock. Continue to hold the memory piston. After
approximately 5 seconds,
MEMORY (#) UNLOCKED or MEMORY (#)
LOCKED appears in the Console Display.
2. If MEMORY (#) LOCKED appears, the memory level is already locked;
release the memory piston. If MEMORY (#) UNLOCKED appears, go to step
3.
3. While continuing to hold the memory piston, rotate the Alpha dial until the
console display reads
MEMORY (#) LOCKED .
4. Release the memory piston. The memory is now locked.
To unlock a memory level so that it can be changed:
1. Press and hold the memory piston ( M1 , M2 , M3 or M4 ) corresponding to the
memory level you want to unlock. Continue to hold the memory piston. After
approximately 5 seconds,
MEMORY (#) UNLOCKED or MEMORY (#)
LOCKED appears in the Console Display.
2. If MEMORY (#) UNLOCKED appears, the memory level is already unlocked;
release the memory piston. If MEMORY (#) LOCKED appears, go to step 3.
3. While continuing to hold the memory piston, rotate the Alpha dial until the
console display reads
MEMORY (#) UNLOCKED .
4. Release the memory piston. The memory is now unlocked.
Reversibles
The Rodgers 657/677 is equipped with a number of reversible controls, so named because
pressing them once will activate them, pressing them again will turn them off. These reversibles,
located on thumb and toe pistons, are especially useful in a performance when you want to
quickly activate or remove a single coupler, stop or other setting.