Rockwell RCV144ACx, Command Reference Manual

Page: 50 / 186

AT Command Reference Manual
3-32 1048
3.4 MNP 10 COMMANDS
3.4.1 AT) Commands
)Mn - Enable Cellular Power Level Adjustment
This command is included only for compatibility and performs no function.
)M0 )M0 command.
)M1 )M1 command.
)M2 )M2 command.
Result Codes:
OK n = 0 to 2.
ERROR Otherwise.
*Hn - Link Negotiation Speed
This command is included only for compatibility and performs no function.
*H0 *H0 command.
*H1 *H1 command.
*H2 *H2 command.
Result Codes:
OK n = 0 to 2.
ERROR Otherwise.
-Kn - MNP Extended Services
Enables or disables conversion of a V.42 LAPM connection to an MNP 10 connection. The parameter value, if valid, is
written to S40 bits 0 and 1.
-K0 Disables V.42 LAPM to MNP 10 conversion. (Default.)
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 Enables V.42 LAPM to MNP 10 conversion; inhibits MNP Extended Services initiation during V.42
LAPM answer mode detection phase.
Result Codes:
OK n = 0 or 2.
ERROR Otherwise.
-Qn - Enable Fallback to V.22 bis/V.22
This command is included only for compatibility and performs no function.
-Q0 -Q0 command.
-Q1 -Q1 command.
Result Codes:
OK n = 0 or 1.
ERROR Otherwise.