Rockwell RCV144ACx, Command Reference Manual

Page: 37 / 186

AT Command Reference Manual
1048 3-19
&V - Display Current Configuration and Stored Profiles
Reports the current (active) configuration, the stored (user) profiles, and the first four stored telephone numbers. The stored
profiles and telephone numbers are not displayed if the NVRAM is not installed or is not operational as detected by the
NVRAM test during reset processing.
Result Code:
OK
Example:
AT&V
ACTIVE PROFILE:
B0 E1 L1 M1 N1 QO T V1 W0 X4 Y0 &C0 &D0 &G2 &J0 &K3 &Q5 &R1 &S0 &T4 &X0 &Y0
S00:002 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:030 S08:002 S09:006
S10:014 S11:255 S12:050 S18:000 S25:005 S26:001 S36:007 S37:000 S38:020 S46:138
S48:007 S95:000
STORED PROFILE 0:
B0 E1 L1 M1 N1 QO T V1 W0 X4 Y0 &C0 &D0 &G2 &J0 &K3 &Q5 &R1 &S0 &T4 &X0
S00:002 S02:043 S06:002 S07:030 S08:002 S09:006 S10:014 S11:095 S12:050 S18:000
S36:007 S37:000 S40:105 S41:003 S46:138 S95:000
STORED PROFILE 1:
B0 E1 L1 M1 N1 QO T V1 W0 X4 Y0 &C0 &D0 &G2 &J0 &K3 &Q5 &R1 &S0 &T4 &X0
S00:002 S02:043 S06:002 S07:030 S08:002 S09:006 S10:014 S11:095 S12:050 S18:000
S36:007 S37:000 S40:105 S41:003 S46:138 S95:000
TELEPHONE NUMBERS:
0 = 1 =
2 = 3 =
OK
3.2.3 &V1 - Display Last Connection Statistics
Displays the last connection statistics in the following format (shown with typical results):
TERMINATION REASON .......... LINK DISCONNECT or LOCAL REQUEST
LAST TX data rate ........... 33600 BPS
HIGHEST TX data rate ........ 33600 BPS
LAST RX data rate ........... 28800 BPS
HIGHEST RX data rate ........ 28800 BPS
Error correction PROTOCOL ... LAPM
Data COMPRESSION ............ V42Bis
Line QUALITY ................ 030
Highest SPX RX state ........ 068
Highest SPX TX state ........ 067