Rockwell RCV144ACx, Command Reference Manual, Page: 31 / 186

AT Command Reference Manual
1048 3-13
Yn - Long Space Disconnect
This command enables/disables the generation and response to long space disconnect. The parameter value, if valid, is
written to S21 bit 7.
Y0 Disables long space disconnect. (default.)
Y1 Enables long space disconnect. In non-error correction mode, the modem will send a long space
of four seconds prior to going on-hook. In non-error correction mode, the modem will respond to
the receipt of a long space (i.e., a break signal greater than 1.6 seconds) by going on-hook.
Result Codes:
OK n = 0 or 1.
ERROR Otherwise.
Zn - Soft Reset and Restore Profile
The modem performs a soft reset and restores (recalls) the configuration profile according to the parameter supplied. If no
parameter is specified, zero is assumed.
Z0 Soft reset and restore stored profile 0.
Z1 Soft reset and restore stored profile 1.
Result Codes:
OK n = 0 or 1.
ERROR Otherwise.