Rockwell RCV144ACx, Command Reference Manual

Page: 112 / 186

AT Command Reference Manual
6-2 1048
3. Fax Class 2 commands can be separated by the “:” character. The “;” character can be omitted if desired. Note that
non-data commands cannot be separated by the “;” which is allowed as a dial modifier.
Table 6-1. Fax Class 2 Commands
Command Function
Service Class ID
+FCLASS= Service Class
Class 2 Action Commands
D Originate a Call
A Answer a Call
+FDT Data Transmission
+FET=N Transmit Page Punctuation
+FDR Begin or Continue Phase C Receive Data
+FK Session Termination
Class 2 DCE Responses
+FCON Facsimile Connection Response
+FDCS: Report Current Session
+FDIS: Report Remote Identification
+FCFR Indicate Confirmation to Receive
+FTSI: Report the Transmit Station ID
+FCSI: Report the Called Station ID
+FPTS: Page Transfer Status
+FET: Post Page Message Response
+FHNG Call Termination with Status
Class 2 Session Parameters
+FMFR? Identify Manufacturer
+FMDL? Identify Model
+FREV? Identify Revision
+FDCC= DCE Capabilities Parameters
+FDIS= Current Sessions Parameters
+FDCS= Current Session Results
+FLID= Local ID String
+FCR Capability to Receive
+FPTS= Page Transfer Status
+FCR= Capability to Receive
+FAE Adaptive Answer
+FBUF? Buffer Size (Read Only)
+FPHCTO Phase C Time Out
+FAXERR Fax Error Value
+FBOR Phase C Data Bit Order