Rockwell Automation PowerFlex 22-WIM-N1, User Manual

Page: 26 / 100

3-6 Configuring the WIM
Figure 3.8 Opening Connection Screen
9. The status bar will update and then when connection is complete, the
StatusMonitor application will launch and show the “StatusMonitor”
screen (
Figure 3.9 ) for the drive.
Figure 3.9 Drive StatusMonitor Screen
You can then select other devices from the Port menu, or other
functions from the Tasks menu.
10. If you will be routing to one or more remote networked drives, you
will need to perform sub-steps A through H in this step. This
requires that you are able to connect to the Bluetooth card/module
(cannot be done offline) because Pocket DriveExplorer for Pocket
PC must interrogate the device and determine what kinds of network
adapters are present.
For an example illustrating remote connection, we are using two
PowerFlex 40 drives with 22-COMM-D DeviceNet adapters
connected to each other using standard DeviceNet cabling.