background image

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014

71

UEFI Set-up Utility

Chapter 5

Intel Rapid Start Technology

Parameter

(1)

(1) See 

page 60

 for an explanation of common buttons near the bottom of screen.

Description

Intel (R) Rapid Start Technology

Enables or disables Intel Rapid Start Technology. 
Options: Enabled or Disabled (default)

IMPORTANT:

 The SSD must first have a private partition allocated that is equal 

in size to the computer RAM.

Entry on S3 RTC Wake

(2)

(2) This data field is visible only when the Intel (R) Rapid Start Technology data field is enabled.

Enables or disables Rapid Start invocation upon S3 RTC wake. 
Options: Enabled (default) or Disabled

Entry After

(2)

Enables or disables RTC wake timer at S3 entry. 
Number range: 10 (default) or 0…120

Active Page Threshold Support

(2)

Enables or disables support for Rapid Start Technology when the partition size is 
less than the amount of memory in the system.
Options: Enabled or Disabled (default)

Active Memory Threshold

(2)

Enables the system to support Rapid Start Technology when the partition size is 
greater than the Active Page Threshold size in MB. When set to 0 (auto mode), it 
checks if partition size is enough at S3 entry.
Options: 0 (default), 1…65535

Summary of Contents for 6181P





























































































































Reviews: