Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
55
Component Replacement
Chapter 4
14.
Remove the PSU ( J).
15.
Install the new PSU in the reverse order of the removal steps.
a. Torque the two screws to 1.4 N•m (12 lb•in) to secure the new PSU.
b. Before reinstalling the computer to the display unit, verify that the
following are properly connected:
–
the two PSU power connectors and their screws
–
the eDP signal and panel cables
c. Remove and replace any cut cable ties.
16.
Follow the steps for
.
J