52
Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 4
Component Replacement
Replace the Power Supply
Unit
Follow these steps to replace the power supply unit (PSU).
1.
Follow the steps for
2.
Place the computer on a flat, steady surface with the rear cover facing
upward.
3.
Remove the eight screws that secure the computer to the display panel (A).
4.
Lift and slide the computer forward so you can unplug the display cables (B).
IMPORTANT
Use an antistatic wrist strap that is connected to the work surface and properly
grounded tools and equipment when handling internal computer components.
DC Powered Integrated Display Model Shown
B
A
A
A
A
A
A
A
A
