118
Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Appendix B
Accessories Installation
10.
Secure it with the screws provided with the kit (F).
11.
Insert the riser board connector in the onboard expansion slot making sure
the board is properly seated in the slot (G).
12.
Tighten the three screws to secure the PCI/PCIe riser board assembly to
the chassis (H).
13.
Reinstall the computer cover as detailed in
Reinstall the Cover on page 46
14.
Follow the steps for
.
If you are installing
Then use
Secure it with
A two-slot riser board
The PCI/PCIe riser bracket provided with the kit
Four screws
A single-slot riser board
The default PCI/PCIe riser bracket
Two screws
Two-slot Riser Board
Single-slot Riser Board
F
F
E
F
F
E
Single-slot
Riser Board
Two-slot
Riser Board
Integrated Display
Models Shown
H
H
H
G
H
H
H
G
IMPORTANT
Make sure the mounting bracket does not pinch any cables under the
bracket.
If you intend to install
Then
A compatible add-in card
now
Proceed to
for instructions.
An add-in card
later
1. Reinstall the rear cover.
2. Apply power to the computer.
