Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
67
UEFI Set-up Utility
Chapter 5
SATA Configuration (RAID mode)
Parameter
(1)
(1) See
for an explanation of common buttons near the bottom of screen.
Description
SATA Mode Selection
Select an operation mode for the onboard SATA controller.
In this case, RAID mode is selected.
(2)
(2) Applies only to computers that ship with the Windows Server 2008 R2 operating system.
SATA Port (0, 1)
Indicates the drive make, model, and size.
Port (0, 1)
Enables or disables the SATA port.
Options: Enabled (default) or Disabled
SATA Device Type
Indicates the SATA drive type connected to the SATA connector.
Options: Hard disk drive (default) or solid-state drive