RocketFish MiFi RF-MFH2 User Manual Download Page 67

Page: 67 / 70

NOTICE TO CONSUMERS:

Any changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

NOTE:

The Radio Frequency (RF) emitter installed in your modem must not be located or operated

in conjunction with any other antenna or transmitter, unless specifically authorized by Novatel
Wireless Technologies.

MODIFICATIONS:

The FCC requires that you be notified that any changes or modifications made to

this device that are not expressly approved by Novatel Wireless may void your authority to operate
the equipment.

RF Exposure

FCC Equipment Authorization ID: PKRNVWMIFI2200

This device is only authorized for use in Mobile applications. At least 8 inches (20 cm) of separation
between the antenna and the user’s body must be maintained at all times.

Summary of Contents for MiFi RF-MFH2







































































Search results

Summary of Contents for MiFi RF-MFH2

Reviews:

Related manuals for MiFi RF-MFH2

Brands by name

Popular brands

RocketFish MiFi RF-MFH2, User Manual

Search results

Summary of Contents for MiFi RF-MFH2

Reviews:

Related manuals for MiFi RF-MFH2

Brands by name

Popular brands