RocketFish MiFi RF-MFH2 User Manual Download Page 12

Page: 12 / 70

Using Your Device for the First Time

IMPORTANT

The device requires an activated account with a network operator to function.

Removing the Tab and Charging the Battery

NOTE

The battery should be fully charged for four hours before using the device for the first time.

➊

Turn the device over to show the bottom panel. Notice a plastic tab sticking out from under
the battery compartment panel.

➋

Pull the plastic tab out in the direction of the arrow.

➌

Connect the micro USB end of the AC wall charger to the micro USB port on the device.

➍

Plug the other end of the AC wall charger into an appropriate electrical outlet. Charge for at
least two and a half hours (four hours recommended).

CAUTION!

Use only an approved charging accessory to charge your device. Use of an

incompatible charger may cause damage to your device and void the warranty.

Summary of Contents for MiFi RF-MFH2







































































Search results

Summary of Contents for MiFi RF-MFH2

Reviews:

Related manuals for MiFi RF-MFH2

Brands by name

Popular brands

RocketFish MiFi RF-MFH2, User Manual

Search results

Summary of Contents for MiFi RF-MFH2

Reviews:

Related manuals for MiFi RF-MFH2

Brands by name

Popular brands