10
To change protocols and TX module, here are the steps:
i. Power the Launch controller off.
ii. Press and hold the BIND button while powering the Launch controller
back on.
iii.
Then the flash colors and times of the LED before buzzer alarms will change,
according to the tables above.
Frsky Version
LED Status
Red Flash twice
Red Flash once
Red Flash Three Times
Red Flash Four Times
Purple Flash Three Times Quickly
Protocol Version
Internal Frsky D16 LBT (ACCST 1. X Version)
Internal Frsky D16 FCC (ACCST 1.X Version)
Internal Frsky D8
Internal Futaba S-FHSS
Internal TX Module O and Run External TX Module
Stage 1 Drone Kit Instruction Manual
