19
•
As well as seeing the brightness or contrast change, the OSD will display the
updated brightness (or contrast) level in the center of the image for 3 seconds.
4. Using an AV or AUX input:
The Scout supports both AV and AUX inputs.
•
To use the AV or AUX input, plug the source into the appropriate port on the
Scout headset.
•
Use the 5-way button to enter the options menu, go to the source sub-menu,
and select AV or AUX. The image on the screen should show the input from the
source.
•
To leave AV / AUX input, return to the options menu and select the new desired
source.
NOTE:
If you shut off the Scout while in AV or AUX mode it will restart in RX mode
and you will need to change back to AV / AUX if you want to continue to use those
inputs.
5. DVR Operation:
Preparations:
For operating DVR, the following preparations should be done;
1. SD card MUST be formatted with a FAT32 file system before use to ensure
stable recording.
2. DVR is able to scan the selected input only and supports standard formats.
NOTE:
Do not place alternative files that you want to keep into the DVR. The DVR
may not recognize the file space and write over your files. Use a dedicated SD
card.
3. Prior to being sure a properly formatted (FAT32) micro SD card is inserted into
the SD card slot. The Scout supports SD cards up to 64 GB in size. Also, verify
that there is a video source displaying inside the Scout headset. This source can
either be an RX signal or an AUX/AV input.
Stage 1 Drone Kit Instruction Manual
