25
v. Once the re-bind gets successful, the status light of the quadcopter will
change to blue.
7.1 Re-Bind for Quadcopter:
In case of failure of connection between quadcopter and launch controller, the
pilot may need to re-bind.
To re-bind for Quadcopter follow the steps as follows;
i.
First, power on the quadcopter and wait until the loading of its system to
complete.
ii. With the help of a screwdriver lightly press the button on the quadcopter. The
status light on the quadcopter will turn green and start to flash.
iii.
Then, power on the launch controller and wait for its system to complete.
iv. With the help of a screwdriver lightly press the “
BIND
” button on the back of
the launch controller. The power indicator will flash red.
Additional advanced settings are available in case of special operations.
7. Advanced Settings:
Stage 1 Drone Kit Instruction Manual
