manualshive.com logo in svg

ROBOTIQ RWC-UR-KIT, Instruction Manual

Share
Download
ROBOTIQ RWC-UR-KIT Instruction Manual Download Page 21

Robotiq Wrist Camera Vision System for Universal Robots

Instruction Manual

Robotiq inc. © 2016

21

3.6.2 URCaps Installation

Make sure the Wrist Camera is properly mounted to the robot arm and that all electrical wiring is correctly done. Refer to 

 and 

Section 3.4

3.5 

for

detailed information on the mechanical and electrical installation. Before proceeding with the installation of the URCaps package, make sure your
Universal Robots’ software is up to date (version 3.3.1.237 on the release date of this manual).

Follow this procedure to install the Wrist Camera's URCaps package :

Go to 

 and visit the Vision System page.

support.robotiq.com

Download the latest UCC zipped file. 

Figure 3.6.2.1 : Download the URCap package from 

support.robotiq.com

 .

 

 

Unzip the content of UCC on a USB stick - different from the provided 16 Gig USB stick containing the Vision server (see 

).

Section 3.6.1

Connect the USB stick in the teach pendant or robot controller. 
Follow these steps for URCap installation on Polyscope :

Vision Server
Make sure the Vision Server has been installed before proceeding with the URCap installation. Refer to 

 for Vision Server

Section 3.6.1

installation.

Software version
Both Vision Server and URCap package have to be the same version (for instance, both 1.0.2) in order for the Vision system to be functional.

Tip
The URCaps Camera Locate file, UCC, include a number version to help you track updates. This version will be also visible in the URCaps
setup screen below.

Summary of Contents for RWC-UR-KIT



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands