manualshive.com logo in svg

ROBOTIQ RWC-UR-KIT, Instruction Manual

Share
Download
ROBOTIQ RWC-UR-KIT Instruction Manual Download Page 16

Robotiq Wrist Camera Vision System for Universal Robots

Instruction Manual

Robotiq inc. © 2016

16

Combo of 2-Finger Adaptive Gripper and Wrist Camera for Universal Robots

For mechanical installation of a Wrist Camera on a UR robot along with Robotiq's 2-Finger Gripper, follow these instructions, and refer to Figure 3.4.2: 

Place the Wrist Camera (RWC-CAM-001) on the robot arm. Align the camera's indexing (dowel) pin properly in Universal Robots' bolt pattern. 
Fix the camera on the robot arm using the provided M6 X 12 LHCS screws and lock washers.

Mount the gripper directly on the Wrist Camera using the provided M5 X 35 SHCS and lock washers. 
Fix the cable along the robot arm, see 

.

Cable Management section

Figure 3.4.2: Mechanical installation of the Combo of 2-Finger Gripper and Wrist Camera for Universal Robots.

When mounting only the Wrist Camera on the robot, the spring pins that would ensure connection to a Robotiq 2-Finger Gripper are
exposed. Be careful not to harm them.

Summary of Contents for RWC-UR-KIT



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands