39
TECHNICAL INFORMATION
ENG
3.7.1. PRODUCT DIMENSIONS
The dimensions (width and height) of the product sections that can be processed must be kept within the limits marked
on the chart. The above-mentioned data are valid when the section is uniform for the whole length of the product.
For best quality results, the product cross section should be as close as possible to the machine diameter.
For products that intersect the hatched areas, contact the Manufacturer.
Machine
Spool
Minimum size of product that can be processed (mm)
Orbit 4
125
50 x 50 x 450
Orbit 6
125
70 x 70 x 450
Orbit 9
125
90 x 90 x 450
Orbit 9
250
90 x 90 x 600
Orbit 12
125/250
150 x 150 x 600
