13
SAFETY INFORMATION
ENG
-
Prepare a machine installation project if the machine is to interact (directly or indirectly) with another machine
or with a production line.
The project must take into account all operating conditions, in order to comply with all laws in force on matter
of safety in the workplace.
-
Check that the installation space is properly ventilated in order to avoid unhealthy air concentration for the
operators.
-
Implement the most suitable solutions to minimise noise emission levels and acoustic pollution.
-
Carry out the electrical connections in accordance with the best practice and in full compliance with the
instructions provided by the Manufacturer and the specific regulations in force.
Important
The electrical connections must be carried out exclusively by operators with acquired and
acknowledged skills in the field of intervention.
-
The installer must test the machine and check, through a general test, that the machine can be commissioned
without any risk for the operator.
-
Dispose of all the packaging components in compliance with the standards in force in the Country of
installation.
Important
Non-compliance with the instructions given may cause risks to the safety and health of people, as
well as economic damages.
2.3. SAFETY WARNINGS FOR USE AND OPERATION
-
The operator must be trained and possess the adequate skills required to carry out the specific tasks and must
be fit to use the machine safely.
-
When using the machine for the first time, the operator must read the manual and identify the control functions
and simulate some operations, especially machine start and stop.
-
The machine has been designed and manufactured to meet all the operating conditions indicated by the
Manufacturer.
Caution - warning
Use the machine only with the original safety devices installed by the Manufacturer.
Do not tamper with, disable, remove or bypass the safety devices installed on the machine.
-
Do not modify the constructive and functional characteristics of the machine in any way.
-
Do not use the machine with the safety devices not properly installed and efficient.
-
Always wear the Personal Protective Equipment indicated in the “Instructions for use” and that provided for by
the laws in force on matter of safety in the workplace.
-
Always keep the perimeter areas in suitable conditions and free from obstacles in order to minimise the risks
for the operator, especially near the control station.
-
The machine must be used by one operator only, that must be appointed and authorised by the employer.
-
The involvement of one or more assistants when performing some operations or maintenance (ordinary)
interventions may pose unpredictable risks.
In order to minimise the risks related to assistants’ involvement, you must inform them in advance on the type
of work to be carried out and the behaviour to adopt.
-
Make sure that no unauthorised persons are within the machine operating area during its production activity
and during maintenance.
-
It is forbidden to climb onto the rotary table with forklift trucks. In addition to being dangerous, it can also
damage the machine.
Important
Non-compliance with the instructions given may cause risks to the safety and health of people, as well as
economic damages.
