ENG
INFORMATION ABOUT THE USE
98
6.5. MACHINE SWITCHING ON AND OFF
1.
Turn the main switch (A
) to “I” (ON) to activate the power supply.
The displayed icon indicates that the “Reset” button (
B) must be pressed.
For “FREEZER” and “INOX” versions only:
Turning the main switch (A) on automatically activates the electric control panel heating.
The panel heating phase is signalled by the lighting up of the indicator (L).
Once the heating phase, which prevents any actions on controls, is completed, the indicator (L) turns off and
the display indicates that the “Reset” butto
n (B) must be pressed.
Caution - warning
For “FREEZER” and “INOX” versions, it is recommended not to cut off the power supply to the machine.
Caution - warning
For “LP” versions, remove the load after the wrapping cycle.
2.
Press the "Reset (B
)” button.
3.
Set the cycle parameters (See paragraph “cycle
parameters setting”).
4.
Perform the cycle starting operations (see paragraph “Cycle start and stop”).
5.
Turn the main switch (A
) to “O” (OFF) to switch the machine off.
6.6. CYCLE PARAMETERS SETTING
6.
Switch on the machine (See “Machine switching on and off”).
7.
Choose the recipe by turning the jog control.
8.
Press the jog control to select the recipe.
9.
Turn to view and modify, if necessary, the parameters already set for the recipe.
10.
Press the jog control to select the parameter and turn to edit the value.
This value will be stored in the relevant recipe.
Summary of Contents for Masterplat FREEZER
Page 2: ...ENG 2 Page left blank intentionally ...
Page 22: ...ENG SAFETY INFORMATION 22 Masterplat PLUS Masterplat PLUS TP3 Masterplat PLUS LP ...
Page 31: ...31 TECHNICAL INFORMATION ENG Masterplat PLUS Masterplat PLUS TP3 Masterplat PLUS LP ...
Page 91: ...91 INFORMATION ABOUT THE USE ENG R Manual cycle See Manual Cycle ECO cycle See Eco Cycle ...
