51
INFORMATION ON HANDLING AND INSTALLATION
ENG
4. INFORMATION ON HANDLING AND INSTALLATION
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
-
Before performing any operation, the authorised operator must make sure to have understood the
“Instructions for use”.
-
Carefully read the “Instructions for use” specified in the manual and those applied directly to the machine
and/or the package.
-
Provide suitable safety conditions in compliance with the regulations on workplace safety to prevent and
minimise the risks.
-
Pay attention to the safety warnings, do not misuse the machine and assess the possible residual risks.
4.2. PACKING AND UNPACKING
The packing is realised, keeping the overall dimensions limited, also in consideration of the transport chosen.
To facilitate transport, shipping can be performed with some components disassembled and appropriately protected
and packaged.
Some parts, especially electrical equipment, are protected with anti-moisture nylon covers.
The packages bear all necessary information for loading and unloading.
When unpacking, check the integrity and exact quantity of the components.
Packaging material should be appropriately disposed of according to the laws in force.
The illustrations show the common types of packaging used.
Package on pallet with nylon protection
Package in crate
Summary of Contents for Masterplat FREEZER
Page 2: ...ENG 2 Page left blank intentionally ...
Page 22: ...ENG SAFETY INFORMATION 22 Masterplat PLUS Masterplat PLUS TP3 Masterplat PLUS LP ...
Page 31: ...31 TECHNICAL INFORMATION ENG Masterplat PLUS Masterplat PLUS TP3 Masterplat PLUS LP ...
Page 91: ...91 INFORMATION ABOUT THE USE ENG R Manual cycle See Manual Cycle ECO cycle See Eco Cycle ...