Robopac Masterplat FREEZER Use And Maintenance Manual Download

Page: 68 / 123

ENG

INFORMATION ON ADJUSTMENTS

5. INFORMATION ON ADJUSTMENTS

5.1. RECOMMENDATIONS FOR ADJUSTMENTS

Before performing any operation, the authorised operator must make sure to have understood the

“Instructions for use”.

Activate all the safety devices provided, stop the machine and assess whether there is any residual energy

before carrying out the operations.

Provide suitable safety conditions in compliance with the regulations on workplace safety to prevent and

minimise the risks.

Pay attention to the safety warnings, do not misuse the machine and assess the possible residual risks.

5.2.

“FILM STRETCH” ADJUSTMENT

5.2.1. SPOOL CARRIAGES OF "FRD" TYPE

Use the lever (A) to lock and unlock the roller (B).

Use the handwheel (C) to adjust the braking action of the stretching roller (B) which determines the film

stretch.

Summary of Contents for Masterplat FREEZER




























































































































Search results

Summary of Contents for Masterplat FREEZER

Reviews:

Related manuals for Masterplat FREEZER

Brands by name

Popular brands

Robopac Masterplat FREEZER, Use And Maintenance Manual

Search results

Summary of Contents for Masterplat FREEZER

Reviews:

Related manuals for Masterplat FREEZER

Brands by name

Popular brands