Robopac Masterplat FREEZER Use And Maintenance Manual Download

Page: 71 / 123

INFORMATION ON ADJUSTMENTS

ENG

5.2.3. SPOOL CARRIAGES OF "FRD for mesh" TYPE

Work on the handwheel (C) until reaching the value displayed on the index (E).

The brake shaft for mesh is an accessory that can be mounted on the carriage later on.

This optional allows the system to use a mesh spool with an “

FRD

”

std carriage.

Important

For a correct tensioning of the mesh, adjust the braking effect so that the outfeed roller (G) is more braked

than the infeed roller (H); moreover, it is necessary to avoid braking the stretching rollers too much to

prevent the mesh from slipping.

Masterplat PLUS FRD

Masterplat PLUS LP FRD

Masterplat PLUS TP3 FRD

Summary of Contents for Masterplat FREEZER




























































































































Search results

Summary of Contents for Masterplat FREEZER

Reviews:

Related manuals for Masterplat FREEZER

Brands by name

Popular brands

Robopac Masterplat FREEZER, Use And Maintenance Manual

Search results

Summary of Contents for Masterplat FREEZER

Reviews:

Related manuals for Masterplat FREEZER

Brands by name

Popular brands