Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller
Back to Top
User Manual v4.05 – Page 8
o
Create rules using up to 5 optical sensors, switches or any analog/digital Arduino sensor
o
Create rules using the 4 flow meters
o
Set level for parameter to activate rule
o
Turn any outlet on or off using any sensor or parameter
o
Turn any water pump or DC accessory on or off using any sensor or parameter
o
Dose your aquarium using any sensor or parameter
o
Backup timer so dosing pump doesn't activate more than once in set time frame
o
Options to skip rule If AC outlet schedule Is on or off
Automatic Top Off (ATO) System (sensors required)
o
Flood proof
o
Float switch to monitor water levels
o
Backup float switch
o
Select maximum time ATO pump can run in case float switches malfunction
o
Check water level every 1-24 hours
o
Float switch must sense low water level for 30 minutes before ATO pump is activated
o
Test mode to bypass delays
o
Receive email alerts when ATO pump starts and stops
o
Receive email alert if ATO System malfunctions
o
ATO Requires resetting if ATO malfunctions
Other Features
o
Adjustable display brightness
o
Auto-dim feature adjusts the screen brightness based on ambient light conditions
o
Independent temperature control for 3 water heaters
o
Header status icons for ATO, webpage open, internet connection, screen lock and controller connection
o
All settings stored in an eeprom so you never loss your settings
o
Smart startup routine resumes controller on power outages base on schedules and custom rules
o
Display all times in 24 hour or 12 hour format
o
One touch to sync display and controller
o
Assign equipment to ports
o
Custom pin code to lock screen
o
Custom home screen dock
o
Multiple home screen docks
Internet Access
o
Monitor all sensors and probes
o
Feed fish
o
Control AC power outlets
o
Receive real-time email alerts
o
Monitors external IP address for changes and emails new address when it changes, you'll always be able to
connect away from home
o
Auto generate strong username and password for web access or customize to your liking
o
View local and external IP address, username and password on display so you never forget your login
information
Email Alerts
o
Email alerts can individually be turned on or off
o
26 different alerts (more coming soon)
o
Receive emails if water or light temperature goes over or under a set value
o
Receive emails if PH, ORP, Dissolved Oxygen, Saturation, Conductivity, TDS, Salinity or Specific Gravity goes
over or under a set value
o
Receive email if controller restarts
o
Receive email if external IP address changes
