Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller
Back to Top
User Manual v4.05 – Page 64
Now you should set your time zone so email time stamps are correct. Click “Settings” on the left side menu and from the
Drop Down, click “Display Settings”. Now you can change your time zone and press: Save Changes.
You can now close your browser as setup on the SMTP2GO website is complete. There is no need to log into your SMTP2GO
account from this point on unless you plan to change the login information the controller uses to send emails.
Set Up Email Alerts on the Controller
Now you need to set up Robo-Tank to use your account to send you alerts.
Browse the microSD card that’s on the controller, (plugged into your w5100 Ethernet shield), and you should see the
following list of files.
a.
Open the file “USER_smtp2go.txt” and add the username you used in step 3, save and close the file.
b.
Open the file “PASS_smtp2go.txt” and add the password you used in step 3, save and close the file.
c.
Open the file “TO_email.txt” and add the email address you want to receive the alerts, save and close the file.
d.
Open the file “FROM_email.txt” and add the email address the alerts come from, save and close the file.
*Note: You can use the same email address for To and From, but doing this will likely cause the emails to go in your spam
folder. Using two different emails is recommended.