Robo-Tank Basic User Manual Download Page 35 | Manualshive

Page: 35 / 70

Robo-Tank Basic User Manual Download Page 35

Robo-Tank DIY All-In-One Aquarium Controller User Manual

Robo-Tank DIY All-In-One Aquarium Controller

Back to Top

User Manual v4.05 – Page 33

Manual AC Power Outlet Control

From  the  Home  screen,  press  the  Power  status
area, on the  right side of the screen, and you see
one of the two  POWER screens on the left. If you
have the controller set to 8 outlets you see the top
image, if you have it set to 16 outlets you see the
bottom image.

On this screen you can manually turn on/off any of
the  AC  power  outlets,  press  any  outlet  and  that
outlet will go in manual mode, all other outlets stay
in auto-mode. If you manually change an outlet or
outlets they will not be controlled by the controller
any more.

Any outlets that are put into manual-mode will have a small “M” appear on the bottom corner of the icon, on Home screen
so you can easily see from there if anything is running in manual-mode. If an outlet is in manual-mode it will never change
unless you change it manually or resume auto mode.

To resume auto-mode, press Resume, on the Home screen dock or webpage, at the bottom of the screen. All outlets that are
in manual-mode will then go back to auto, and the “M” will disappear from the icon. (Also, if you change an outlet status
from the webpage it’ll go into manual-mode for that outlet, then if you press Resume on the webpage or controller, it will
resume full auto-mode).

When you are ready to return to auto mode, press Resume, on the dock, bottom left of the Home screen or on the webpage,
and all the AC outlets will resume auto mode.

You  can  also  Start  everything  up  at  once  (bottom
left),  or  Shut  everything  down  at  once  (bottom
right), doing this will put all outlets in manual mode,
and  to  resume  auto-mode,  press  Resume,  on  the
Home screen.

«
...
33
34
35
36
37
...
»

Summary of Contents for Basic







































































Reviews:

No comments