Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller
Back to Top
User Manual v4.05 – Page 6
o
10 schedules available for each outlet, can be set for specific days of the week.
o
Turn AC outlet on with schedule and off with custom rule or vice versa
o
Turn AC outlets on or off using custom rules
o
Control AC outlets from the internet (phone or computer)
Monitor 4 Flow Meters
o
View data in liters or gallons
o
View flow per minute
o
View flow per hour
o
View total volume
o
Use flow meters in custom rules to control equipment
Monitor Temperature and Humidity from 7 Sensors
o
2 ports - DS18B20 temperature sensors (referred to as water and light temperature)
o
1 port - DHT22 Air temperature / humidity sensor (referred to as air temperature)
o
4 ports - optional DS18B20 or DHT22 sensors
o
Customize names for all 7 sensors
o
View temperatures in Celsius or Fahrenheit
o
View all Parameters in a central location
o
View minimum and maximum temperature readings
o
Turn heater on/off when temperature rises or falls
o
Optional low and high-level audible/visual alarm for each parameter all set within UI
o
Optional low and high-level email alerts for each parameter all set within UI
o
All parameters can be used with custom rules to control equipment
o
Full data logging and graphs for all sensors
o
View sensor data from the internet (phone or computer)
Works with PH, ORP, Dissolved Oxygen and Conductivity EZO Atlas-Scientific Circuits (2 pH circuits can be
connected)
o
Calculate CO
2
using pH and KH value (KH value is manually set in UI)
o
Optional low and high-level audible/visual alarm for each parameter all set within UI
o
Optional low and high-level email alerts for each parameter
o
Home screen scrolls through any of the 8 parameters or view only one (scroll time adjustable and touch to
view next parameter)
o
Connect 2 pH circuits to use 2 pH probes
o
All parameters can be used with custom rules to control equipment
o
View all parameters in a central location
o
View up to 9 different parameters (pH, pH, ORP, Dissolved Oxygen, Saturation, Electrical Conductivity, Total
Dissolved Solids, Salinity and Specific Gravity)
o
Full data logging and graphs for all 9 parameters
o
View sensor data from the internet (phone or computer)
o
Step by step full easy calibration for all circuits, 1, 2 or 3 point depending on circuit
Automatic Fish Feeding
o
Control auto fish feeder using 2 daily schedules or manually
o
Select AC outlet status during feeding
o
Set length of feeding
o
Enable/disable auto fish feeder
o
Run Auto Feeder from internet (phone or computer)
248 Different Schedules
o
Schedule 6 different transitions for the LED's
o
Schedule 16 AC outlets up to 10 times per day, each schedule can run for selected days of the week
o
Schedule 8 dosing pumps up to 10 times per day, dose daily or select days of week to dose