Roberts Gorden Vantage CTH2V-100, Installation, Operation & Service Manual

Page: 27 / 68

SECTION 6: H
EATER
I
NSTALLATION
21
Step 6.3 Couplin g and Tube Assembly
Step 6.3.1 Couplin g and Tube Assembly (Continued)
A
Close co u pling and slide
opposite end into tab.
Position tab
u nderneath
g u ide rail.
B
Insert w ide end of slide bar/co u pling lock into
g u ide rail on opposite end of tabs. Slide the slide
bar/co u pling lock u p the g u ide rail u ntil sn u g
(approximately 3" (8 cm) to 4" (10 cm)).
C
Insert t u bes into co u pling
u ntil end of each t u be rests
against internal pins.
D
Strike slide bar/co u pling lock w ith mallet or hammer
u ntil tight.
Description Part Number
Co u pling 01329600
Slide Bar/Co u pling Lock 01329700
T u be 91409XXX
• Repeat Step 6.3 A - D until all tubes are assembled. See Page 22, Section 6.3.2 .
Tighten slide bar as sho w n belo w .