ROBEL ROPOWER 70.02, Operating Manual

Page: 39 / 152

7. Putting the machine into operation
39
7. Putting the machine into operation
7.1 Setting up the machine
WARNING
Risk of injury!
The machine is too heavy for one person
alone. An injury to the muscles, bones or ten-
dons may result, particularly those in the back
and shoulders. A variety of other injuries may
result.
►
Always transport the machine with suita-
ble equipment, e.g. suitable trolley.
► Lift the machine with suitable lifting
equipment e.g. crane, hoist, tail lift or at
least a four
*)
person team.
► See chap. 2.9 for further details on manu-
al handling.
*)
This value is conservative and has been
determined following the demands of the
standard EN 13977:2011. However, the
operating company is entitled to conduct a
risk assessment and to allow less persons
if this is the outcome of the risk assess-
ment.
1. Move the Hybrid Drive Unit to the installation site.
2. Place the Hybrid Drive Unit on a level, firm surface only.
7.2 Make electrical connections
1. Make sure that the working machine has been prepared in
accordance with the applicable operating manual and that
the main switch of the working machine is OFF.
CAUTION
Trip hazard!
The cables of the working machine may pose
trip hazards. A variety of injuries can result.
►
Make sure that the cable does not pose a
trip hazard.