5. Operating conditions
29
Fig. 22: Drain the fuel
1
Drain screw
2
Filter cup
Drain the fuel:
1.
Turn the fuel tap to "OFF"(CLOSED), remove the filter cup
and empty it.
2.
Turn the fuel tap to "ON"(OPEN) and drain the fuel from the
tank into a suitable container.
3.
Refit the filter cup and tighten firmly.
4.
Drain the carburettor by undoing the carburettor drain
screw. Drain the fuel into a suitable container.
5.
Replace the engine oil.
6.
Remove the spark plug and pour one tablespoon of clean
engine oil into the cylinder.
7.
Crank the engine several revolutions to distribute the oil,
then screw the spark plug back in again.
8.
Pull the starter cord until a slight resistance is noticed.
9.
Then continue pulling until the notch on the starter pulley
aligns with the hole on the recoil starter (see next illustra-
tion).
Summary of Contents for ROPOWER 70.02
