27
DMX Calibration protocol:
After having calibrated required functions press [Enter] to confirm (or [Menu] to cancel and return to the menu
without reset by the "ArES" function) and use the "ArES" function in order to write the calibration values to the
memory (EEPROM) and to make a reset in order to check the new adjusted positions of the colour,effect and
gobo wheels.
9. Error and information messages
HEAt
This message appears if you try to switch on the lamp within 5 minutes after having switched it off (the
lamp is too hot). The message will appear on the display if the lamp doesn't ignite within 28 seconds. The SCAN
1200 XT will store this information and automatically ignite the lamp when the 5 minutes period has expired.
LAEr
The ignition of the lamp is seven times unsuccessful (the HEAt message appeared six times before), and
the display shows "
LAEr", meaning that the lamp could be damaged or even missed, the fixture is overheating
(this can occur if the ambient temperature is 45° C or more) or there could be a failure on the ignitor or ballast.
Please place or replace the lamp, check the ambient temperature or contact your dealer if the situation was not
caused by the lamp.
FAn
The message informs you that the fixture was overheating and switched off. This message will appear on
the display if the fan speed operating "LOOF" was selected.
DMX chanel
Function
1
Colour 1
Calibration 0-255
2
Colour 2
Calibration 0-255
3
Effect
Calibration 0-255
4
Static gobo
Calibration 0-255
5
Rotating gobo
Calibration 0-255
6
No function
7
Colours 1
8
Colours 2
9
Effects
10
Static gobo
11
Rotating gobos
12
Gobo rotation
13
Iris
14
Focus
15
Strobo
16
Dimmer
S
m
o
o
t
h
m
i
c
r
o
s
t
e
p
m
o
v
e
m
e
n
t
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
