25
"dimr" -
a dimmer, value 0-255
"S.tim." -
a step time,value 0,1-25,5 seconds
"COPY." -
a copying the current prog. step to the next prog. step .If the last prog.step is copied to the
next prog. step ,parameter "P.End" is increased about 1 by itself (except step 99).
5. Press Enter]-button to confirm adjusted value .
6. Press [Mode]-button,select next prog. step and repeat this procedure (steps 4 and 6).
The editting programs "PrG.1,PrG.2,PrG.3" are saved in the current modified fixture (master or slave1-9).
8.8 Reset function
Press [Enter] button to run a reset. This option enables the SCAN 1200 XT to index all effects (functions) and
return to their standard positions.
8.9 Special functions
Use the [Up] and [Down] buttons to browse through the special functions and select the one by pressing [Enter].
Manual control of effects
The function allows you to control manually the channel functions of the fixture. Use the [Up] and [ D o w n ]
buttons to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the
menu.
