25
View Logs
- Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting.
Fixture Errors
- Use this menu to read fixture errors which have occured during fixture operation.
Fixture Status
- Recorded following actions: Power On, Power Off.
Fixture Position
- Recorded installation positions of the fixture:
Fixture Temperatures
- Recorded temperatures which have exceeded defined levels.
7.3 Tab "Personality"
User mode
- The Robin UV Strobe allows you to recall up to 3 user settings. After switching the fixture on for
the first time, the User A settings is active. Now all changes made in the “Personality” menu , ”Addressing”
menu and the “Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to the
User A settings. If you now select the User B settings, from this moment the changes made in these menus will
be saved to the User B settings. After switching the fixture off and on, the User B setting is active. In this way
you may use the 3 fixture operating behaviours.
User A Settings
- the function recalls the user A settings.
User B Settings
- the function recalls the user B settings.
User C Settings
- the function recalls the user C settings.
DMX Preset
- Use the menu to select desired DMX mode.
Mode 1
- 8 control channels (default)
Mode 2
- 20 control channels
Mode 3
- 3 control channels
Mode 4
- 4 control channels
View Selected Preset
- Use the menu to display channels included in the selected mode.
DMX Input
- Use the menu to select mode of receiving DMX signal.
Wired Input
- DMX signal is received by means of the standard DMX cable.
Wireless
- DMX signal is received by means of the inbuilt wireless module.
Wireless In/XLR Out
- the fixture receives wireless DMX and sends the signal to its wired DMX output.
The fixture behaves as " Wireless/Wired" adapter.
Microphone Sensitivity
- Enter the menu if you want to adjust the microphone sensitivity from 1 (max.) to 20
(min.).
Douse setting
- If this function is on, the light intensity slightly falls down after some few seconds at achieve
-
ment of desired dimmer level .The function does not influence channels Special Effects, Zone Effects and Zone
1 Intensity- Zone 12 Intensity.
Dimmer Curve
- Use this menu item to select linear or square law dimmer curve.
Init Effect Positions
- Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal connected.
Screen Settings
- Use this menu to change the touch screen settings.
Display Intensity
- The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay
- The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock
- The item allows you to lock the screen after last touch (or pressing any button on the
