11
Always keep correct orientation of fixtures towards the stacker.
Warning for outdoor operation!
To ensure declared IP rating, the fixture must be in the following positions only (towards ground).
Allowed tilt must not be higher than +/-15° from a horizontal axis of the fixture.
The display covering transparent cover must be closed and its four screws fully tightened.
Fixture´s XLR connectors are dust and water protected according to IP 65 by mating with related X-HD cable
connectors.
They cannot stay disconnected outdoor. DMX output connector (XLR female) at the last fixture in a DMX line
has to be covered with the rubber cap before inserting a terminator. The rubber cap does not supply the termi
-
nator. The XLR terminator (male) has to be dust and water protected.
If the fixture is to be outdoor without connecting to DMX line, always interconnect its DMX input with DMX output
to keep declared IP rating of XLR connectors.
Ethernet connection is not suitable for outdoor environment, especially in rain!
