32
12. Maintenance and cleaning
DANGER !
Disconnect from the mains and allow to cool completely before starting any
cleaning or maintenance work
The front transparent cover will require monthly cleaning as smoke fluid tends to build up residues, reducing
the light output very quickly. For cleaning use a wet clout and a vacuum-cleaner or air-jet. Do not use solvents
or any other aggressive cleaning fluid.
The interior of the fixture including fans should be cleaned annually (or more often according operating condi
-
tions) using a vacuum-cleaner and a soft brush. A qualified electrician should service and clean the interior of
the fixture as disconnecting and connectinng electrical cables is required.
Should you need any spare parts, please use genuine parts.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
To get access to the fixture´s inside
1. Unscrew three screws (1) along both sides of the rear cover (2).
2. Disconnect cables between rear cover and inside of the fixture (power, display, DMX).
3. Unscrew two screws (3) at each side of the chassis with power supply (4) and pull the chassis out
with care.
4. Now you can clear inside of the fixture including fans (5).
12.1 Replacing fuse
Only replace the fuse by a fuse of the same type and rating.
Before replacing the fuse, unplug mains lead!
1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing
(anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuse holder in the housing and fix it.
12.2 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.
