26
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen
- The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation
- The menu allows to change display orientation.
Normal
- Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted
- Inverted orientation (needed if the fixture is hanging on the truss).
Auto
- The option activates a gravitation sensor for automatic screen orientation.
Note:
Auto
option is set as default. You change the display orientation by touching the icon
on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit
- Use the menu item to change temperature unit from °C to °F.
Fan Mode
- Use the menu to set the fixture fans to max. fan power mode ("
High
") or to auto- control mode
("
Auto
").
Date & Time Settings
- Use this menu to set current date and time for the fixture log system (menu "
View
Logs
"). Set this menu item before first fixture operation.
Default Settings
- The menu item allows to set all fixture parameters to the default (factory) values.
7.4 Tab "Manual Control"
Manual Effect control
-
Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences
-
Use the menu item to run a test/demo sequences without an external controller, which will
show you some possibilities of using Robin UV Strobe.
Music Trigger
- Use the item to activate the sound control of the running program via the built-in microphone.
Preset Playback
- This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None
- The option disables “Presetting playback” function.
Test
- The option starts the test sequences.
Prog. 1
- The option starts user program No. 1.
Prog. 2
- The option starts user program No. 2.
Prog. 3
- The option starts user program No. 3.
Play program
- Use the menu to run desired program in a loop.
Play Program 1
- The option starts user program No.1.
Play Program 2
- The option starts user program No. 2.
Play Program 3
- The option starts user program No. 3.
Edit Program
- Use the menu to create or to edit desired program. The Robin UV Strobe offers 3 free programs,
each up to 88 steps.
Edit Program 1
- The option allows to edit user program No.1.
Edit Program 2
- The option allows to edit user program No.2.
Edit Program 3
- The option allows to edit user program No.3
To edit program:
1. Touch the item which you want to edit (“Edit Program 1” - “Edit Program 3”).
2. Touch the item "Edit Program Steps".
3. Touch the item "Step 1".
